Contributors for this blog...
1) Hello Everyone... I am Tushar Bhaskarwar sharing my knowledge from this blog. I have done master in engineering from SGGSIE&T and recently working in company and just sharing my experience which will definitely help you to increase your information. My area of interest is instrumentation and control. This blog will give you overall idea about instrumentation and automation.
You can reach me at:
Email:- bhaskar.tushar90@gmail.com
Facebook:- Tushar Bhaskarwar
2) Hello Everyone. I am Kumud Ranjan Roy sharing my knowledge from this blog. I'm a Ph.D. research scholar under the National Doctoral Fellowship (NDF-2018) program by AICTE, Government of India in the Department of Instrumentation & Control Engineering at Shri Guru Gobind Singhji Institute of Engineering and Technology, (SRTMU University) Vishnupuri, Nanded, Maharashtra, India.
I have done my M.Tech in Electronics & Communication Engineering from the Defence Institute of Advanced Technology Pune, Maharashtra, and my project title was “Design and Development of 100W Solid State Power Amplifier for S-Band Frequency range for radar Application” which was executed with the support of LRDE, DRDO Lab Bangalore. I have done my B.Tech in Instrumentation & Control Engineering from the Haldia Institute of Technology.
Email:- kumudrr91@gmail.com, 2018pin901@gmail.com.
1) Hello Everyone... I am Tushar Bhaskarwar sharing my knowledge from this blog. I have done master in engineering from SGGSIE&T and recently working in company and just sharing my experience which will definitely help you to increase your information. My area of interest is instrumentation and control. This blog will give you overall idea about instrumentation and automation.
Email:- bhaskar.tushar90@gmail.com
Facebook:- Tushar Bhaskarwar
2) Hello Everyone. I am Kumud Ranjan Roy sharing my knowledge from this blog. I'm a Ph.D. research scholar under the National Doctoral Fellowship (NDF-2018) program by AICTE, Government of India in the Department of Instrumentation & Control Engineering at Shri Guru Gobind Singhji Institute of Engineering and Technology, (SRTMU University) Vishnupuri, Nanded, Maharashtra, India.
I have done my M.Tech in Electronics & Communication Engineering from the Defence Institute of Advanced Technology Pune, Maharashtra, and my project title was “Design and Development of 100W Solid State Power Amplifier for S-Band Frequency range for radar Application” which was executed with the support of LRDE, DRDO Lab Bangalore. I have done my B.Tech in Instrumentation & Control Engineering from the Haldia Institute of Technology.
I have always been inspired, motivated, and dreaming to contribute in the field of Research and development concerned with the technological innovations in Indian Defence. The area of my interest is ''Unmanned Aerial Vehicles (UAVs) Control System" and allied topics like Motion planning and Coordinated Control System of UAVs.
Email:- kumudrr91@gmail.com, 2018pin901@gmail.com.
11 comments
Write commentsNice Blog Sir....
ReplyHmm...Trying to give E-learning...
Reply:D
mastt blog sir
ReplyAll #JOB Seekers!!!!
ReplyJoin Till 30th of SEPTEMBER - #Industrial_Automation Hands on Practical Training in All Major Brands.
And Get Core #Interviews Before #DIWALI.
Hurry up!! To get this Available offer...
DYNAMIC INSTITUTE OF AUTOMATION & CONTROLS(DIAC)
Address: B-74 (Top Floor), Near Sector 15 Metro Station, Sector 2, Noida, Uttar Pradesh 201301
Email: hello@diac.co.in or Call us +91-93100 96831
Visit: https://www.facebook.com/DIACTRAINING/
good...
ReplyThis training course teaches how to maintain, calibrate and configure the equipment and components used in modern industrial instrumentation systems. Call us 91-9310096831. More http://diac.co.in/process-instrumentation/
ReplyGood...
Replynice blog sir
ReplyThanks for sharing such a great blog Keep posting..
Replyindustrial Automation Training in Delhi
industrial Automation Training institute in Delhi
Are you ready to join automation technologies? We offer online training on PANEL DESIGNING & AUTOCAD you can access 24/7 from anywhere in the world.
ReplyRegister now!
www.diac.co.in
Contact us: 91-9953489987, 9711287737
Job Oriented Training.
ReplyIndustrial Automation & its concepts with Practical & Individual Training. Certification Course, 100% Job Assistance, Updated Content, Flexible Batches.
For Registration & Enquiry, 91-9953489987, 9711287737
EmoticonEmoticon